Lamborghini Huracan EVO STO

ACF Type: image

Performance Gain: 12-15hp, 20Nm

Fitment for : Lamborghini Huracán EVO, STO, Performante.

The Eventuri Huracán EVO intake system represents a harmony between visual form and function. It is the uncompromising benchmark upgrade for the Lamborghini Huracán platform. We eschewed the limitations of conventional design, utilising organic curvature and prepreg carbon fiber to replace the utilitarian, restrictive factory airboxes. The result is a system that elevates the engine bay into a true exhibition of high-performance craftsmanship.

Beyond the aesthetics, the intake architecture ensures unrestricted, laminar airflow, immediately sharpening the vehicle’s throttle response and delivering a discernible gain in power. Crucially, the system fully liberates the glorious, unfiltered acoustic signature of the naturally aspirated V10.

From the carbon fiber to the bespoke silicon joiners and integrated heat management, every element has been considered and refined. The Eventuri intake is not merely an accessory; it is an essential sensory and performance enhancement that truly completes the ultimate Huracán driving experience.

The Eventuri Difference

The Huracan Eventuri system uses our Patented Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect. You can read more about the housing design and how it works HERE.

Performance

ACF Type: image

ACF Type: wysiwyg

Below are independent dyno graphs showing the comparison between the Eventuri and the stock airboxes on a Huracan with a tune. The only thing changed between runs was the intake itself. All runs have the tune already applied. As you can see, power and torque are increased through a large portion of the rpm range not just at the peak. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency. Since dyno results vary between consecutive runs, this graph shows the highest power figure achieved with the stock setup vs the highest figure with the Eventuri.

Product Details

ACF Type: image

ACF Type: wysiwyg

Part Numbers:

  • EVE-HCNEVO-CF-INT : Lamborghini Huracan EVO, STO, Performante Intake System

 

ACF Type: image

ACF Type: wysiwyg

The Eventuri Huracan EVO intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:

Each intake system consists of:

  • Carbon Fiber Patented Venturi Filter Housings
  • Bespoke High Flow Dry Cone Filters
  • Carbon Fiber Inlet Ducts
  • Custom Silicon Couplers
  • Laser Cut Heat Shields
  • Laser Cut Stainless Steel Brackets

 

 

ACF Type: image

ACF Type: wysiwyg

Patented Venturi Filter Housing Assembly

The filter housings comprise of a bespoke high flow filter, aluminium cowl, laser cut brackets and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shape the airflow down to the intake tubes. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack.

ACF Type: image

ACF Type: wysiwyg

Here is a diagram to show the comparison between our patented design and a regular intake system. Further details can be read in the Technology page.

ACF Type: image

ACF Type: image

ACF Type: wysiwyg

Carbon Ducts

The duct seals to the housing and channels ambient air from the side air outlets to the filter. It fits over the OEM ducting system and smoothly transitions to the circular filter housing shape. In order to ensure a good seal against engine bay heat, it seals to the filter housings using neoprene gaskets.

ACF Type: image

ACF Type: wysiwyg

Custom Silicon Couplers

The filter housings secure to the inlet manifold with our custom couplers which replace the OEM flexible hoses. Our couplers provide a much smoother flow path to the plenum and feature internal steps to match to the walls of the throttle body ensuring there are no steps for the airflow which would create turbulence. Movement is catered for in the housing assembly itself.

ACF Type: image

ACF Type: image

Video

ACF Type: wysiwyg

Installation Guide

ACF Type: wysiwyg

Tags

ACF Type: wysiwyg

  • huracan evo
  • huracan performante
  • huracan sto

 

RELATED PRODUCTS

ACF: none

Array ( [post_type] => Array ( [0] => product ) [post_status] => publish [posts_per_page] => 3 [post__not_in] => Array ( [0] => [1] => 3462 ) [tax_query] => Array ( [relation] => AND ) [paged] => 1 [orderby] => Array ( [date] => ASC ) [meta_query] => Array ( [0] => Array ( ) ) )
0.0628850460052 seconds