Below is a dyno graph showing the comparison between the Eventuri and the stock airboxes on a standard F-Type 5.0l Supercharged. As you can see, power and torque are increased through a large portion of the rpm range with almost 35ft-lb increase at 5000rpm. On the road, this increase in power and torque can be felt with a sharper part throttle and full throttle response and a more aggressive power delivery all the way to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency.
Similarly here is a power graph showing the comparison between the stock airboxes and the Eventuri Intakes on the 3.0l V6 F-Type. Tests were carried out on the same day to ensure ambient conditions did not vary. As can be seen there is a significant improvement in low end torque delivery which translates to an improved throttle response on the road. However the more impressive gain is from 5000rpm to redline where the power delivery continues to climb rather than taper off with the stock airboxes.
Each component is engineered for a purpose and to a very high standard. Each kit consists of:
Carbon Intake Housing Assemblies
- Patent Pending intake housings made from 100% Prepreg Carbon Fibre
- Aluminium inlet cowlings
- High Flow Cotton Mesh Filters
- 100% Prepreg Carbon Fibre Tubes
- Laser Cut Stainless Steel Mounting Brackets
- High Quality Silicon Couplers with OEM spec clamps
Made from 100% prepreg carbon fibre of the highest quality, the workmanship on the housing is second to none. This encapsulates the filter and is mated to an anodised aluminum inlet cowl to ensure a smooth inlet flow path. The filter itself is a deep pleated, high flow double cone configuration which is dry to avoid damaging the MAF sensor. Mounted in the wheel arches – the intake housings are shielded from engine heat and draw in ambient air ensuring maximum gains.
Carbon Inlet Tubes
100% prepreg Carbon Fibre tubes guide the airflow from the MAF tubes to the stock engine tubing for the supercharger. By designing the tubes with the minimum bend radius and ensuring matched diameters on both ends – we have ensured that the intake airflow remains as laminar as possible.
Laser Cut and formed from Stainless Steel – the brackets are designed for strength and ease of installation.
Please download the installation guide here.
Download Installation Guide